• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, uPVC window repairs they do not corrosion or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they typically fit into frames of the past easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance you'll need find some plastic spacers to help the new pane to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor which could cause them to be trampled under.

It's a great idea to seal the gap after the glass is removed. This will prevent drafts and water from getting into your home until a professional arrives to fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could be affected by a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts and even security. It's important to take action immediately if you discover that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll have to open the window to access the frame. Then, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's important to replace the seal as soon as possible so that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it could also be due to the handle mechanism getting worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to shut the window and perform a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking may need to be removed. When it comes to uPVC repair, you should avoid 'over-caulking'. This will make your window harder to clean and lower its energy efficiency.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with ease, it may be the hinges that are at fault. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It's very simple to change the hinges on a window however it is easier if someone helps you hold the frame.

It is also important to verify that the upvc window repair near me hinges are opening and closed in the correct direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a certain way or due to inadequate installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to provide suggestions.

It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It also decreases the possibility of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be unbalanced due to wear, creating an opening between the frame and sash. If they are damaged beyond repair, it may be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window, can also be misaligned, and again it may be possible to just give them a good clean, but in certain cases, it may be necessary to have these replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the risk of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be placed over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. However, it is important to recognize that all windows have a life span and there may come a point where it is more efficient to replace them than fix them. If you are having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.