• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When it's Time for Window Replacement

When old windows no longer enhance the look of your home and protect it from elements, or reduce noise It's time to replace windows. What should you do?

There are a myriad of factors to take into account. Let's break it down to assist you in making your decision design, energy use and labeling, installation and cost.

Energy Efficiency

Energy savings is among the primary reasons homeowners invest in new windows. In fact replacing old, drafty windows can reduce cooling and heating costs by as much as 20%. However, some people are disappointed to find that the energy savings resulting from the windows they have replaced do not cover the initial cost for a long time.

Window performance and operation should be a major consideration for any homeowner considering window replacement. If a window isn't functioning properly could increase your home maintenance expenses, utility bills and increase the possibility of air leaks. For instance windows that do not move up and down or slide side-to-side correctly may require to be replaced because the frames have swollen or warped due to excessive moisture from condensation or lack of sealing.

Another indication that windows replacement near me are in need of replacement is the presence of mildew or mold inside and outside the frame. This is usually an indication of a damaged seal or damaged weather stripping. The growth of mildew and mold that result from these issues may create health and safety issues for your family members if they are not addressed promptly.

The new windows will also improve your home's security, curb appeal, and potential resale value. These benefits are enhanced if the windows used for a renovation are energy efficient according to the National Fenestration Rating Council.

The energy efficiency of windows is measured by their U-factor. The lower the U-factor, the more insulation power the window offers. A U-factor that is less than 0.26 is a good rule of thumb. Besides the U-factor, other considerations for energy efficiency include frame material and design. Vinyl is a strong low-maintenance option, however it can expand and contract with temperature changes, leading to leaks. Wood provides a classic look and better insulation, but it requires regular maintenance; aluminum is light and easy to maintain, but it is a heat conductor and is not a good insulator.

For the best results, homeowners should work with an experienced window installation professional to ensure that the new windows are installed correctly. A professional can help you select the appropriate windows for your home's architectural style and climate zone, and provide information on resale value and homeowner satisfaction.

Style

It's not a secret that new windows add to the value of a home. However, once you start looking at the styles, types and configurations available, it can get overwhelming. It's not just about function or style -- choosing the wrong windows can affect a home's selling value.

Window companies have a number of ways they can replace old windows with energy-efficient windows, based on the condition of the existing frames. A contractor can replace the exterior frame with pocket replacement glass in windows. The interior trim and sashes are left intact. Another method, often suggested for older homes or in historic areas with strict grille requirements, is a sash pack replacement. These are kits that come with aluminum jamb or wood liners and replacement sashs for the upper and lower half of the window.

A third method is to install full-frame replacement windows, which require removing the entire existing frame and the sash window replacement. This is typically advised when the windows are so damaged that they're beyond repair. Full frame installations are also recommended when homeowners want to change the type of window, for example by replacing double-hungs with sliders or cases.

When buying replacement windows, look for windows with the NFRC label, which indicates the window's energy-efficiency rating. The higher the rating, the more energy-efficient the window.

Before installing your new window, loosen and take off the stops that keep the window in place. Carefully work around the sill of the existing frame to ensure that you don't harm the wood. If needed, shim it. When the new window is set you can shim the top as well as the bottom edges to ensure a snug fit. Then, apply caulk around the outside edge to seal it.

If the window you've chosen doesn't quite fit the opening, you can use foam-rubber backer rods to fill any gaps larger than 1/4 in (0.64 centimeters). This is a better solution alternative to caulk, which could trap moisture and cause mold and wood rot. If you have any gaps that are larger than this, screw 1 in (2.5 cm) furring strips to the sides of the existing frame to raise the height.

Budget

The initial cost of replacing windows is high, but it's worth it for the energy savings it provides and the improved comfort it brings to your home. It also enhances the value of your home and could help reduce utility bills. It's important to set the budget prior to beginning your project to guide your decisions. To help you determine the amount, think about your household's energy requirements and the type of windows you want to install. A reputable contractor for windows can provide insights into your expenses outside of your personal goals and make suggestions to cut them down.

upvc window lock replacement frame materials are one of the most important factors that influence replacement windows cost. Vinyl and aluminum are the least expensive options, while composite, wood and fiberglass frames are more costly. Consider the benefits and drawbacks of each frame material to help you select the most suitable option for your home. Wood windows, for example, are more durable, offer better insulation, however they require regular maintenance and are susceptible to water damage. Aluminum and vinyl are less expensive but they are more susceptible to rusting, and do not offer the same level of insulation as wood.

Your window replacement company will offer a variety of ways to install windows that affect overall costs. The most labor intensive is a complete replacement of the frame. This involves removing the entire window and replacing it with a brand new one. This method is often recommended when the frames are damaged or rotted. It's also required for renovation projects that have a historical background. Insert window replacement is a less costly option. In the process, the current sash, operating hardware and exterior trim are removed. However the exterior trim and siding remain intact. The new window will be inserted in the opening, insulated, and sealed.

If you are doing the work yourself, make sure you take into account the cost of the equipment. A caulk gun, waterproof shims and tape measure are all essential. Make sure you buy shims of different thicknesses so that you can accommodate the various sizes of your window sills as well as head jambs. You'll also require elastomeric caulk to cover any gaps in the frame and the casing.

Installation

Windows come in a variety of shapes and sizes to suit the architectural style of each home. There are many choices, such as double-hung and single-hung windows, sliding windows, bay, bows, casement circles, awnings jalousie, egress and circle windows. They are also available in various materials and finishes. Some are insulated to increase energy efficiency.

Replace your old, inefficient windows with energy-efficient double-hung window to save money. The process is quite simple however the results are well worth it. You'll also get the advantages of having a gorgeous new, fresh window.

Before installing your new window, take out the screen and sash from the current frame. This will make it easier to move the window of the frame and prevent damage to the material. After the window is slid into place it's time to apply caulk on both sides of the frame and in the gap in the event that there is one, use the caulk recommended for windows and doors.

You can use cedar or plastic shims, depending on your preference and the condition of the frame. This will ensure that the window is placed properly in the opening. Be careful not to over-shim the window however, as this can cause condensation and water to build up inside the frame and deteriorate the frame.

After the window is set your installer will ensure that the frame is level, plumb and caulked thoroughly. Install any trims that were removed from the interior to accommodate the window. Then, you can paint or stain the window to be in keeping with the colors of your home. Seal and insulate the sill, jambs, and flanges on the exterior of your home for improved window performance.