• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good repair.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However, if windows with double panes are held in place by internal beading, it will be more difficult to remove the old panes and put in new ones. In this instance, you will need to locate some plastic spacers that will assist the new pane to fit correctly into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards fall on the fabric instead of onto the floor where they can be trampled upon and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will stop drafts and water from getting into your property until a professional arrives to fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. In time, they could be affected by a variety of issues that include sliding. A sagging uPVC window could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to open the windows to reach the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you are happy with the size of the window, tighten the screws to hold them in place.

If you cannot reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen. This is usually due to screws that have become undone over time, but it can be due to the handle mechanism getting worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to shut the window and then perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's important to take action. Water leaks from windows can not only cause destruction of your home's structure but also hamper your efforts to regulate the temperature within your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.

This is an easy fix that can be accomplished by any DIYer who has the ability. Based on the severity of the problem the caulking used previously may require removal before a new layer of caulk can be put on. It is crucial to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to note that if the leak originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your upvc window repairs near me windows are stiff to open, or slack and blow open in a breeze, it may be hinges at the fault. They can be easily repaired by any skilled DIYer and can be completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. Changing a window hinge is an easy procedure, but it is easier with someone else to help hold the frame in place.

Make sure that the uPVC hinges open and close in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or by improper installation in the factory. Sending us a picture via our website will often solve the issue. We are happy to give suggestions.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should perform this every year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. The hinges may also become misaligned due to wear, creating an opening between the frame and sash. If they are damaged beyond repair, it may be necessary to have them realigned. Secondly the interlock, this is located on the hinge side of the window and can also be misaligned, and again it is possible to just give them a good clean, but in certain cases, it may be necessary to have them replaced.

The next common reason for draughts is window seals. They are prone to wear or damaged over time, and allow air to escape through these gaps. Installing high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures, and reduce the risk of draughts.

One of the most effective ways to cut down on drafts is to use a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be placed on top of your windowsill. They can help keep cold air out and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it is more cost-effective to simply replace them rather than repair them. If you encounter any issues with your Upvc window it is recommended to speak with an expert immediately.